『Flow meter verification experiment report』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Which is a good laboratory gas flowmeter?
2. Does the electromagnetic flowmeter need to undergo third-party verification before use?
Before leaving the factory, the manufacturer of the electromagnetic flowmeter will conduct a large-scale verification on the imitation Sakura factory calibration equipment, and only after passing the inspection can it be shipped.. The calibration equipment of manufacturers can only be put into use after passing the acceptance of the national quality inspection department, and the national metrology department also conducts regular spot checks every year. So under normal circumstances, the inspection report issued by the manufacturer also has the effect of proving that the quality is qualified. When conducting trade settlement or major project acceptance, the owner usually proposes that the electromagnetic flowmeter needs to undergo third-party verification to check whether the products installed by the contractor are qualified products. So whether a third-party verification is needed or not depends mainly on the willingness of the property owner, and the relevant costs usually incurred are borne by whoever proposes it. The standard table on the manufacturers calibration device needs to be verified and corrected by a third-party every year.
3. Experimental report on flowmeter calibration
4. Installation and use explanation of portable Doppler ultrasonic flowmeter
The installation and use of portable Doppler ultrasonic flowmeter need to be combined with the equipment principle, technical characteristics and operating specifications. The specific process is as follows:
1. Equipment principle and core function Portable Doppler ultrasonic flo
_600x400.jpg)
2. Installation steps and precautions 1 Probe installation fixed probe: Fix the probe to the bracket, hold the stainless steel measuring rod, and insert the probe into the water body. Direction and position: The probe is facing the direction of water flow, ensuring that the water flow in the measurement area is uniform and stable. There are no obstacles (such as stones, sediments, garbage, etc.) in front of the probe to avoid interference. Water depth requirement: The integrated pressure water level sensor can directly measure water depth, and can also be used in shallow water. 2. Equipment connection and startup connection: Portable handheld terminal and Doppler ultrasonic flowmeter. Power on: Press and hold the "confirm" button for 4 seconds to start the device; Shutdown: Press and hold the "back" button for 5 seconds. Initial setting: The device is set uniformly at the factory and
Hot Blog
Related AD
