『Flow meter cheating』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. Zhejiang essence flowmeter garbled
Hello, do you want to ask why essence flowmeter garbled? The random code adjustment method of essence flowmeter is as follows: first, the flowmeter interface has+, _, E， Three buttons,+represents the up button, _ represents the down button,+and _ are used together to press the return button, E is the confirm button. To debug, first press E to enter the menu interface and press the up button. Find the SystemUNITS and press E to confirm the modified unit, which is cubic meters per hour. At this time, a password needs to be entered. Before debugging, check the front two digits of the flowmeter nameplate model, and the password is 00 plus the first two digits of the nameplate.
2. How to artificially make the electromagnetic flowmeter count when it is not connected to water
1. Analog signal input: Input an external analog signal into the electromagnetic flowmeter to simulate the liquid flow signal and make the electromagnetic flowmeter count.
. However, it is important to ensure that the parameters of the analog signal match those of the electric sliding attitude magnetic flowmeter, otherwise measurement errors may occur.2、 Using a simulator: Use a specialized simulator to simulate the liquid flow signal of the material file, input it into the electromagnetic flowmeter, and thus make the electromagnetic flowmeter run. Simulators can simulate different flow ranges and fluid characteristics, which can more accurately simulate liquid flow signals.
3、 Using manual control: By manually controlling the output signal of the electromagnetic flowmeter, it can run continuously. This method requires operation based on the signal characteristics and
3. How to interfere with ultrasonic flow meters
1. Transmit ultrasonic waves with the same frequency as the flow meter.
; Old deficiency2. Continuous and high-intensity blasting sound;
3、 Apply mud to the probe, but it must be thick and thin;
4、 Ultrasonic probes are usually made of ceramic materials, which are relatively brittle. If you try to break them, a crack can change their center frequency and make them ineffective. However, the probe with steel protection on the surface is another matter;
5、 Destroy the temperature sensor of the lead scraper, causing the temperature drift correction system to fail and reduce accuracy;
6、 power failure! Connect again after a while and then refuse to acknowledge...
4. How to interfere with ultrasonic flow meters
There are multiple methods to interfere with ultrasonic flow meters, one of which is to emit ultrasonic waves with the same frequency as it.
. This method interferes with the normal operation of ultrasonic flow meters by simulating or replicating their emission signals. In addition, continuous and high-intensity blasting sounds can also interfere with the normal operation of ultrasonic flow meters, which may cause errors in the signals received by the sensors, thereby affecting the accuracy of the flow meters. Another method is to use mud to sell the probe and apply it, and it must be thick enough. This can block the transmission of ultrasonic signals, causing the flowmeter to malfunction. In addition, crushing the ultrasonic probe is also an effective interference me
Hot Blog
Related AD
